14

Aug

What Can You Not Do With Quartz Countertops?

Quartz is one of the toughest materials you can install on your countertops but this doesn’t mean you can throw just anything at it—there are some things that you can do that can damage it.

What can you not do with quartz countertops? Well, there are plenty of things you can’t do with the common ones being:

Letting spills sit on the countertops

If you have been shopping for quartz, you might have noticed that the countertops are marketed as highly stain-resistant. While this is true, the countertops aren’t stain-proof. This means that if you let the spills sit on the countertops for a long time, they are bound to get to the inner layers and stain the surfaces.

To prevent the stains from developing, make it a habit to wipe and clean the spills as soon as they happen.

You can remove some of the stains from the countertops but this isn’t a great way to go about it. Since prevention is always better than cure, you have an easier time preventing the stains from coming about in the first place by wiping the liquids and other spills as soon as you notice them.

Placing hot items directly on the countertops

The same way the countertops are stain-resistant, they are heat resistant but they aren’t heatproof. This means that if you place hot items directly on the countertops, you are bound to damage the surfaces and you don’t want this, do you?

One of the ways heat damages quartz is by creating thermal expansion due to rapid temperature changes.

The extreme temperatures also damage the resin on the countertop surfaces which causes the countertops to discolor and when the countertops discolor it’s hard to fix them. If you don’t have money to replace them, you are stuck with ugly countertops.

Cleaning the countertops using any cleaner

Since the countertops are tough you can clean them using any cleaner, right? Wrong! Like any other countertop material, using the wrong cleaning agents you damage the countertops with the most common one being stains.

As a rule of thumb, stay clear of acidic and alkaline cleaners, as they will break down the bonds between resin and quartz, which leads to permanent damage to the countertop surface.

Over time, the harsh acidic cleaners such as lime, lemon, and vinegar weaken the sealant on the countertops surface, making the countertops prone to staining.

To effectively clean the countertops without causing any damage to them, use dish soaps, hand soaps, or antibacterial soaps mixed with water.

In the same way, you should avoid abrasive cleaners, you should avoid abrasive cleaning pads. This is because the pads will cause small scratches on the surfaces that give your countertops a cheap look.

For the best results and avoid damaging the countertops, use a microfiber cloth. The cloth is soft, absorbent, and doesn’t leave any watermarks.

Cutting foods directly on the countertops

The same way you have the impression that the countertops are tough and you can place anything on them is the same way you think that you can use the countertops as a chopping board.

The countertops are tough and they can resist some of the impact but when you repeatedly expose the surfaces to the same abuse, you are bound to damage them. This means that when you repeatedly cut items on the surfaces, you will eventually damage them.

To avoid this, you should never cut directly on the countertops. Instead, always have a chopping board in the house to use for chopping tomatoes, meat, and any other thing.

Scraping the surfaces using metallic objects

Even with the best care, you are bound to have food, gum, and other materials sticking on your surfaces. To restore your countertops you have to scrape this gunk.

Some homeowners have the impression that the metallic objects will do a better job, but this isn’t the case as they are known to scratch the surfaces and leave permanent scratches on the countertops.

To get rid of the gunk and leave your countertops looking spectacular, use a plastic knife or scraper.

Sealing the countertops

The last thing you should never do is to seal the countertops. Unlike marble and granite countertops Rockville that are natural and have large pores, quartz counters are manufactured with tightly binding polymers and resins that bind the stone together and don’t require any sealing.

15

Jun

How to Change Countertops without Replacing

Are you wondering how to change countertops without replacing them? There are plenty of ways on how to do it. Here are some of them:

Install some tile

If you don’t have money to buy granite countertops, you should go the tile way. Here you need to buy the tile countertops then lay them on already existing countertops such as laminate.

Before you place the countertops on the new surfaces, put a waterproofing membrane on the existing countertops and an edging trim around your sink. Once you are done, start tiling the surfaces.

While this project seems easy, it’s not, especially if you have never done it before so if this is your first time, consider hiring a professional to help with the installation.

Install a concrete countertop

Concrete countertops are affordable, and you can plaster concrete on any surface. You only need to ensure that the surface can carry the concrete weight.

Begin with sanding the surfaces, then apply a feather finish product according to the instructions given on the bottle.

You should then apply an even layer of concrete on the surface and let it dry. Once it has dried, sand it with 120 grit sandpaper, then apply two more concrete layers.

Most homeowners opt for the standard look but if this isn’t what you are looking for, customize the surfaces as per your needs.

Slap on a coat of paint

The beauty of painting countertops is you can easily do it by yourself even if you have never done it before. You can use any paint to transform your surfaces but for the best experience, use high-quality enamel paint.

Begin preparing the surfaces by roughing them up with a power sander to provide a suitable surface for the paint to adhere to. Once the surfaces are prime for the paint, apply your desired paint with a brush or sponge roller.

Would you love to add texture to the counters? Use a sponge dipped in contrasting paint colors.

Your imagination is your limit when transforming your countertops with paint, so you should be as creative as possible to get an interesting look.

After applying the final coats, apply a couple of polyurethane coats to protect the painted surface and add a glossy shine.

Cover the surfaces with polyurethane

When properly installed, polyurethane adds a deep, glossy shine to the countertop surfaces, and the beauty is you can use several variations of the product to refurbish your countertops.

If you have never done it before, hire a professional to help you place the polyurethane on the countertops.

If you don’t have money to hire a professional to help with the installation, there are plenty of videos online you can use to learn.

Install granite overlays

From their name, you place granite overlays directly on your existing surfaces, and if you don’t have a large kitchen, you can do the installation in one day.

To install the overlays, remove the sink then cover the counter and backsplash surfaces with overlays. All you have to do is to attach the ¼-inch pieces using adhesive to your surfaces.

Although you can easily install the overlays on your surfaces, you should always hire a professional to help with fabricating the pieces to your desired size.

Apply a concrete skin coat

If you like the concrete look, but don’t want to remove your existing counters and install concrete counters from scratch, apply a concrete skim coat on the surfaces with a specially designed product for patching or skim coating floors.

You should note that while the skim coat might make the countertops look tough, they aren’t, and they don’t last as long as full concrete counters.

Cover the countertops with contact paper

Contact papers make a lot of sense if you are renting a property, but you want to transform the look of the surfaces. Since you can’t transform the surfaces permanently, contact papers make an excellent option.

Begin with finding contact papers resembling your dream countertops. These can be quartz countertops Rockville or any other surfaces. You should then clean the surfaces and, after drying, position your paper in such a way that there are as few seams as possible.

Using a credit card or a similar product, flatten down the paper and trim the excess. Go over the surfaces with a sealant and overlap any seams by at least an inch.

30

Apr

What Color Granite Is Cheapest?

Granite countertops don’t come cheap, and one of the factors that affect the price of the countertops is the countertop’s color. Common colors such as white and black are cheaper compared to rare colors such as green and red. This means that if you are looking to save money, you should go for common countertop colors.

Are you wondering what color granite is cheapest? Tan and black granite are the cheapest, so if you are strapped for money, these are the ones to go for. While this is the case, there are plenty of other cheaper alternatives, including white granite, that you can buy if tan or black isn’t your color. These cheaper alternatives include:

Dallas white

Although it’s known as Dallas, this isn’t where it’s mined. The countertop is quarried in Aguia Branca, Brazil. The countertop is characterized by low water absorption and low porosity, making it an excellent choice for kitchens and bathrooms.

The countertop has a white background and dark crystals scattered throughout, giving your home an interesting appeal.

Although, most slabs have crystals, it’s not uncommon to find some slabs with brown or golden cream veins that make the countertop resemble an abstract art painting.

Due to the tight grain structure of the countertop, you don’t have to install a face resin on the countertops. The lack of resin means that you can place a hot pot on the countertop without worrying about damaging the countertops.

Although, the countertops are tough to take the heat, you should note that continued exposure to heat increases the chances of damaging them. To protect the countertops from damage, use a trivet or a hot pad every time you place a hot object on the countertops.

To get the most from the countertop, ensure that it’s installed by a professional. The Dallas white color pairs excellently with white cabinetry, but if you don’t want your entire bathroom or kitchen to be white, pair it with dark wood cabinetry such as dark walnut.

Azul Platino

Azul Platino has been around for hundreds of years, and it features an off-white background with small bluish-gray specks. It’s also common for the slabs to have black spots or even black or white veining.

Most of the Azul Platino slabs are large, making them ideal choices for kitchen islands and other areas where you need to install large-sized slabs.

Uba Tuba

It’s named after the place it’s mined. Ubatuba, São Paulo, Brazil. Besides being affordable, the countertop is also beautiful, and when you properly install and take good care of it, it will last for a long time. The countertop features a dark green background with brown, green, and gold flecks scattered across the granite slab.

In some cases, the slab has small veins that can be white, gold, or turquoise.

When you install the countertops, pair them with dark cabinetry to bring out exciting features. You can also pair them with white cabinetry for an elegant contemporary look.

New Caledonia

This is another countertop quarried in Brazil. Although it’s natural, it’s unique in that it has a uniform look such that two slabs look almost similar.

The natural stone countertop features a white background with gray or brown speckles that run uniformly throughout the slab giving it an interesting look. The heavy grain pattern makes it easy to hide the stains, so you don’t have to worry when liquids and foods spill on the countertops.

Since the countertop has a uniform look, it perfectly fits both traditional and contemporary kitchens and bathrooms. To bring out the brown and bedrock minerals, pair them with dark wood-stained cabinetry. On the other hand, if you want to bring out the charcoal flecking, pair it with light cabinetry.

Valle Nevado

It’s one of the most popular, affordable countertop granite colors, and it’s loved for its ability to coordinate with many design styles. The countertop features a tight grain structure that minimizes the need to apply a resin to it.

Due to its versatility, you can effectively pair it with both black or white cabinetry. When you pair it with white cabinetry, you bring out the tiny back crystals. On the other hand, when you pair it with black cabinetry, you bring out the pale gray tone of the countertop.

The key to getting the most from it is to work with experienced granite installers Rockville that know what they are doing.

30

Mar

How Do I Get The Best Deal On Granite Countertops?

Although granite counters are beautiful and significantly improve the house’s look, they don’t come cheap. Fortunately, you can do several things to get the countertops at a good price. Are you wondering how do I get the best deal on granite countertops? There are plenty of ways, with the most common ones being:

Shop around and compare prices

What do most homeowners do when they are looking to buy granite counters? They visit the first granite shop and make the purchase. In most cases, they do this because they are in a hurry to get things done and move on to the next thing. This is wrong as they often end up spending too much money than they should have.

To save money and get the best deal, take your time and visit different granite stores and see what they offer. Of course, you should only consider buying from a store stocking high-quality stones at a low cost.

You can’t have ample time if you start your research late, so to ensure you have as much time as you need, start scouting for countertops at least 3 months before you embark on your project.

Buy wholesale

When you buy anything wholesale, you save a lot of money, and you should do the same when you are buying granite counters. The cool thing is most granite stores will sell you the countertops at wholesale prices when you are buying many slabs. There are even some stores that will sell you one slab at a wholesale price—you only need to look.

Be flexible with granite color.

One of the prime factors affecting the price of countertops is the color of the slab, where the rare colors cost more than the easier-to-find colors. As you can guess, this means that if you are looking for a specific rare color, you end up paying a premium for your countertops.

To save money and get a perfect deal, you should be flexible in your color choice. The beauty is since granite is natural, it comes in plenty of colors to choose from. If you are in the granite store and find that your desired granite color is expensive than your budget, choose a cheaper color that is close to your color of choice.

Order from a local supplier

While you can buy the granite slabs from anywhere in the world, it’s good you buy them from your local supplier. The reason for this is because the slabs will be cheaper to transport from the local supplier to your home.

Granite slabs are heavy, and if you ship them from a long-distance, they can cost you an arm and a leg, and you don’t want this, do you?

Granite sellers ship their products in bulk, so they don’t spend as much money as you would if you shipped just a few slabs for your kitchen.

To save even more money on transport, ask the seller if they can transport the slabs for you, for free.

Go for granite remnants.

If you are looking for small granite slabs for certain kitchen elements, such as the backsplash behind the stove, don’t spend a lot of money on whole granite slabs. Instead, get granite remnants.

These are small granite chunks that are leftover from previous projects.

Since they are leftover and often too small to fit an entire kitchen, they are cheaper than entire slabs.

When you are in the granite store, ask for the remnants, and you will get them at a low price, which sees you saving a lot of money.

Go with a standard eased edge.

The type of edge you install on your countertops has a significant impact on the overall cost of granite surfaces, so be cautious of the edge you settle on. As a rule of thumb, choose the standard eased edge as it’s much cheaper than the tiered or bevel edge.

Install the countertops by yourself

If you are a dab hand at DIY projects, save money by bypassing granite installers Rockville and installing the countertops by yourself. Of course, ensure that you follow the right procedure when it comes to their installation.

14

Feb

Do I Need Plywood under Granite Countertops?

If you are asking, do I need plywood under granite countertops? You must be thinking about installing granite in your home, but aren’t sure whether also budget for plywood, right?

Well, you need plywood if your granite slab is less than 3cm thick. You should note that you will still need support in certain situations, even if your countertops are more than 3cm thick. These situations include:

Over the dishwasher.

The dishwasher opening has an opening that goes completely unsupported since there is no cabinet for it to rest on. The plywood support will provide the granite counters with the support it needs.

Besides the support, it’s wise you ask the contractor to install mesh under the countertop at the dishwasher location for additional support.

Bartop overhang

The bar top overhang creates an unbalanced loading condition, so if someone puts weight on the edge of the countertop, it will rotate in the force’s direction. It’s for this reason that you will need additional support for the cantilevered portion of your granite.

Even if the contractor installs mesh under the cantilevered portion of your countertop, the support isn’t enough to provide you with the amazing support you are looking for. For maximum support, install plywood.

Why use plywood to support natural stone?

While it might seem silly to support a stone with wood, it actually makes sense. For once, plywood is durable, while granite is fragile, especially if the slab is thin. This means that the piece of plywood will provide you with the support you are looking for.

Plywood is also inexpensive compared to solid hardwoods. This means you can provide support to your countertops without breaking the bank.

If you were to use stones instead of plywood, you would have to use multiple stones to join the pieces together, which will leave unsightly seams on the countertops. On the other hand, installing plywood means you have a smooth and seamless countertop that you can be proud to show off.

Are there other granite countertop support options?

If you don’t like securing your countertops with plywood or you have no access to it, don’t worry as there are plenty of other options you can go with. These options include:

Corbels

A corbel is a support where the back attaches vertically to the cabinet or wall, and the top acts as the support where you can rest other objects on. Corbels are similar to L-shaped brackets, but they are made as solid 3D objects designed to be seen.

The cool thing is, unlike brackets, corbels are designed to be both aesthetically appealing and functional. Since they leave space for your legs, corbels are perfect supports for a bar top overhang.

Poles

Poles are as simple as they sound. They come straight up from the floor, providing support to the underside of the countertop. Poles make an excellent choice when you are planning to install a large overhang.

While poles are great, provide additional support by installing some subtop, such as plywood or wire mesh.

Brackets

Brackets are like corbels, but they are designed not to be seen. A good example of the hidden countertop bracket is the L-shaped bracket. Brackets work like corbels where you mount them vertically to the cabinets, having a space on top to support the counter.

After installation, there is nothing between the bracket’s top and back, making them almost invisible.

Another popular bracket is the knee wall bracket that is straight and often mounted horizontally into a knee wall. For those wondering what a knee wall is, it’s a short wall that doesn’t extend all the way from the floor to the ceiling.

During installation, you cut holes into the wood underneath where you are planning to install your countertops, then install the metal sheets straight into the wood to support the countertop overhang’s weight.

Work with a professional

Regardless of the type of support you are using on your countertops, ensure the installation is done by a professional granite contractor Rockville. The last thing you want is to hire a novice that botches your expensive countertops.

31

Jan

7 Excellent Kitchen Countertop Cover-Ups

Don’t like the current look of your countertops? Don’t rush to hire countertop replacement services providers, as there are several ways you can cover your countertops without requiring contractor services. To help you out, here 7 excellent kitchen countertop cover-ups:

Tile the countertops

Tiles are excellent at covering floors, walls, and showers, and there is no reason you shouldn’t use them to cover up your old countertops. When choosing the tiles, go for glazed ceramic and porcelain tiles as they are the most stain and heat resistant.

They also come in a wide range of sizes, shapes, and colors. Avoid natural stone tile as it requires periodic sealing that can be too much work on your part.

You can install the tiles directly on your countertops without removing the old countertops. You only need to ensure the tiles are flat and stable enough to prevent the new tiles from cracking.

As you are installing the tiles, you should note that while tiles are durable and easy to maintain, the grout joints are prone to staining. To minimize the stains, seal the countertops as soon as possible after installing the tile. You should then apply the sealer every few years to maintain the protective barrier.

Lay laminate over the countertops

If you have old laminate countertops with square edges, you can cover them with a new laminate layer. The layers are sold in sheets of up to 5 feet wide and 12 feet long, and all you need to do is to visit your local store and place your order.

If your countertops have raised and rounded edges, often known as waterfall edges, you can’t cover them with new laminate surfaces as the new material can’t conform to the edge contours.

Use a countertop refinishing kit.

Refinishing kits have everything you need to cover your countertops. The refinishing kits include an epoxy-like paint and decorative stone chips that create the natural stone look.

To cover your countertops using the kit, you simply need to follow the kit’s instructions. While this method is highly effective, you should note that it involves a lot of hard work, it’s messy, and you need to pay close attention to the kit’s details.

Cover your countertops with wood

Have you always wanted butcher block, or are you drawn to the beauty of real wood countertops? You can cover your old, beaten countertops with wide planks of solid hardwood. You can even get creative and use a blend of hardwood and bamboo plywood.

The cool thing with hardwood is it’s more durable and repairable than plywood. Only plywood comes in larger pieces and is more affordable.

Bamboo plywood offers the best of both worlds. It has a thicker top layer that ensures it’s durable and easy to repair and at the same time comes in 4 x 8-foot sheets like regular plywood.

You should note that covering your countertops with hardwood requires woodworking skills and the right tools. You can do the work by yourself if you have the skills or hire a professional to help you out.

Install modular granite

Also known as granite or stone overlay, modular granite is a system of small thin stone slabs designed to cover old countertops. The stones are 16 by 18 inches wide, which means there are fewer joints between the pieces.

For the problematic inside and outside corners, there are special pieces made for these sections, as well as the optional edge pieces.

Cover the countertops with film

Countertop film is thicker than shelf or contact paper. Many people refer to it as a cross between vinyl flooring and shelf paper and have a self-adhesive backing for sticking directly to the old countertop surface.

To install the film, layout the film, trim it to a rough size, and align it to the countertop edges. You should then stick it down using a squeegee tool to remove the air bubbles.

While the film will cover your ugly surfaces, you should note that it’s not a long-term solution, so use it as a temporary way of covering your surfaces.

Paint the countertops

Painting your countertops is easy, fast, and gives you immediate results. You can also do it by yourself without involving granite contractors Rockville or other professionals.

13

Jan

How Do You Save Money On Granite Countertops?

Since granite is a luxurious material, many homeowners imagine having to spend astronomical amounts on it. What if I told you it doesn’t have to be this way? Operating on a budget and wondering how do you save money on granite countertops? Here are tips on how to go about it:

Buy a prefabricated stone.

A prefabricated stone is one that has already been cut before arriving at the store. Since the supplier doesn’t have to cut the stone, they often sell it at a lower price, which sees you saving money.

Prefabricated stones also prevent unwanted delays as the supplier picks the stone from the store and delivers it to your home without working on them.

While the prefabricated stone saves you money, you should note that it might not fit your kitchen perfectly as it doesn’t have custom cuttings.

Before you go for this stone, ask your contractor whether it’s a wise thing to do. You don’t want to save money on a stone you won’t use or install it, and it gives your kitchen an ugly look, do you?

Take your time

What do most homeowners do when they are looking to install countertops in their homes? They rush to the nearest store and pick the slab that is pleasing to their eyes. You shouldn’t do this if you are looking to save money.

As a savvy shopper, take your time. Ask yourself, where can I find granite countertops? The materials are sold in big box stores, from granite fabricators and companies specializing in prefabricated granite counters, and bathroom design studios.

You should then hit these stores and see what they have to offer. As you are shopping, keep in mind that most big box stores don’t stock many countertop options and tend to be expensive, so it’s wise to avoid them.

Get estimates from different suppliers and compare them. The estimates should include the cost of the countertop, the cost of delivering it to your property, and the installation cost.

Carefully review the estimates and buy from a contractor that makes the most sense.

It’s also wise to shop in the company of an experienced contractor who will guide you on buying a countertop material that is right for your home and gives you the best results.

Settle for a simple color

If you have been shopping for the countertops for a while, you must have realized that certain countertops are more expensive than others solely due to their colors.

Some colors are rare than others, and the rare ones tend to be more expensive. And since you are looking to save money, avoid countertops with the rare color.

You might argue that your kitchen will look better with the rare color, but you should know you are better off changing the design elements in your kitchen to fit the color of a more affordable countertop rather than going for the expensive stone.

For example, you can paint or stain your cabinets to match the less expensive color, and you save money you would have spent on the rare color.

Keep an eye on the hidden costs.

When installing countertops, the price of the countertops is just one of the costs. There are plenty of other costs that come with it, such as the cost of installation, seaming, transportation, edging, backsplash finish, and many others.

To save money, buy from smaller stores with plenty of countertop options and often install the countertops at a lower price.

Streamline the project by choosing the standard eased edge instead of fancier edges such as the bevel edge. You also save money by choosing another finish for the backsplash.

Use granite tiles instead of slabs.

If looking to redo the entire kitchen or bathroom, use granite tiles instead of slabs. Although, you won’t get the same look as with the slab, tiles are cheaper to buy and install. Tiles are also thinner, which means less raw materials to deal with and easier transportation.

The light and thin nature of the tiles means you can also install them directly over your existing counters.  Due to this, granite contractor Rockville has to undertake little to no demolition work.

28

Dec

Can You Remove Granite Countertops and Reuse Them?

Imagine this. You have spent thousands of dollars renovating your house with premium granite counters then due to unforeseen circumstances, you have to move out of the house or sell it.

You can’t imagine moving to the new house without the seamless design, durability, ease of maintenance, and color patterns of granite.

Can you remove granite countertops and reuse them? You wonder. The simple answer is it’s most likely impossible as there are plenty of hurdles you have to go over for it to be a success. These hurdles include:

You have to match the kitchen space layout

Since you had already cut the slabs during installation, the only way you can use them in your new home is if they fit the footprint of your new kitchen cabinetry.

This means if in the old layout the granite had cutout around the wet bar area or around the sink area, for you to reuse your countertops in the new kitchen you should have the exact layout, which as you can guess is highly improbable.

Even if by miracle the old and new kitchen layouts match, you have problems if the new kitchen is larger than the old one.

In such a scenario you have to find matching granite pieces which can be difficult if the granite pattern and color is unique.

Even if you manage to get the piece, you will have a visible seam where you attach the additional slab. As you can guess this can significantly affect the look you are trying to achieve.

So to conclude, for you to successfully remove and reuse your kitchen countertop, the two houses should have similar cabinet layouts. The length and width of the countertop should fit the cabinet dimensions.

If you have excess granite, your contractor can trim it down, but if the granite is not enough, you have plenty of issues to solve.

High granite damage risk

Most homeowners install granite for its tough and indestructible nature, but you should know that granite is heavy and brittle.

This means it’s almost impossible to remove the countertops in one large slab as the risk of damage is high.

For you to safely remove the countertop, hire a professional to come with special tools, which as you might guess isn’t cheap.

You also have to involve several people to hold along the countertop’s length to avoid pressure points that might lead to cracking.

Even when you hire experienced contractors, most of them will require you to sign a contract that frees them from liability should the granite crack during removal. This is due to the high risk of damage that comes with removing the stone.

Before you decide to remove the granite, find out the type of granite you have. Granite can be weaker and fragile or it can be harder and stronger. Obviously, you should go for one that is harder and stronger as it will be easier to handle and move without risking a lot of damage.

You also should consider the thickness of the granite counter. It’s better to remove a thicker slab than a thinner one. To tell how thin your countertop is, check it from beneath the cabinet.

If there is plywood below the granite, then the countertop is thin and has high chances of cracking but if there is no plywood, the stone is thick and there are chances of removing it with no issues.

Work with an expert contractor

There are plenty of perks that come with removing and reusing granite counters. One is you don’t leave behind your precious countertops you spent a lot of money on.

Secondly, you don’t have to break the bank to purchase new countertops in your new home.

While this is great, as discussed above, it comes with plenty of challenges you have to be strategic when approaching them. To increase the chances of the process being successful, work with experienced granite contractors Rockville.

The contractors should have removed and reused other countertops in the past. When you hire the right ones, they will help you decide whether it’s wise to remove the countertops or not.

The contractors will also remove and reinstall the countertops if the stone is healthy enough for reuse.

16

Sep

Will Granite Countertops Increase Home Value?

You have been doing your research and found that granite is one of the best materials you can go with. It’s tough and will instantly transform your kitchen and bathroom countertops. If you are thinking about selling your house, later on, you must be wondering, will granite countertops increase home value?

The answer to this question is yes. Properly installed granite surfaces will increase your home value. Here are some of the reasons the countertops may add value to your property:

They have a timeless appeal.

Granite has been around for centuries, and over the years, it has retained its natural strength, beauty, and durability. Since the countertop is natural, it has unique veining, marbling, and colors. This means if you are looking to add value to your home and make it more appealing to potential home buyers, what better way than installing unique granite slabs?

They are low maintenance.

There is not a single homeowner that wants to spend hours maintaining their countertops. They want pieces they can easily clean with a damp rug then go on with their daily activities. This is granite. To keep granite in top condition, you only need to clean, seal, and polish it.

This is attractive to most homebuyers, as most are looking for beautiful surfaces that don’t require complicated care.

They are strong and durable.

There is no homebuyer looking to buy a material that they will have to replace after a few weeks or months—they want countertop pieces that will last for years if not their entire lifetime. Compared to laminate, solid surface, and butcher block countertops, natural stone countertops last a lifetime with minimal maintenance.

Granite surfaces are environmentally friendly.

Unlike many countertop materials on the market that require harmful manufacturing, granite is a natural product quarried from the earth without harmful chemicals. You can polish or hone granite before installing it, but you don’t need to take it through any other manufacturing process to get it ready.

When properly maintained, granite can last for as long as your home stands, which reduces waste in the landfills.

How can you maximize granite countertop ROI?

For you to increase the value of your home for as much as possible, you need to choose the right countertop slab. Some of the tips to put into place include:

Go for natural colors and patterns that complement your cabinetry.

A neutral color palette will appeal to more buyers, which increases your potential ROI when you sell your house. If you have lighter wood or white cabinets, go with black or dark gray countertops as they add eye-catching modern contrast to your home. On the other hand, if you have dark wood cabinets, choose beige, gray, or light cream countertops.

Avoid stains

Like other natural stone countertops, granite develops stains from contact with heat and moisture. If you love cooking and your kitchen has a lot of activity, choose countertops with a simple pattern as they will show less staining over time.

To reduce the stains from developing on the surfaces, seal the surfaces with a high-quality sealer. Granite experts recommend you seal the surfaces once a year but if the kitchen experiences large spills or strong chemicals, seal your surfaces more frequently.

Choose a polished surface.

A polished surface comes with plenty of benefits. For one thing, it makes the slab pop, so it’s more appealing when you install it in your home. A shiny, reflective surface also makes your kitchen look cleaner, newer and bigger.

The polished finish is also the least porous finish you don’t need to apply a lot of sealant. The surface is also easy to clean and maintain.

Buy slabs that are at least 3-cm thick

Stone slabs come in different thicknesses. Usually, 2 cm, 3 cm and 5 cm. Two centimeter slabs are the thinnest and they are best used in small surface areas and bathrooms. If looking for good quality pieces for your kitchen countertops, granite installers Rockville recommend you go for 3 cm slabs.

The slabs don’t require extra support, give your kitchen aesthetic appeal that your buyers are looking for, and won’t run you as much as the thicker ones.

08

Sep

What Happens If You Don’t Seal Granite Countertops?

If you have been around natural stone countertops, you know you need to seal them to keep them looking their best, but have you ever asked yourself what happens if you don’t seal granite countertops? Here are some of the things that can happen:

Stains from food and grease

When you don’t seal your countertops, they tend to quickly absorb food and liquids, leading to deep stains. Since the countertops are bare, the stains develop within a matter of minutes, even if you are quick to wipe the spill.

The countertops not only absorb liquids, but grease and pigments as well. For example, if you leave a carton of strawberries on your countertops, it’s only a matter of a few minutes, and you find a large stain on your countertops that is hard to remove.

Stains from water

Properly sealed granite will repel liquids and prevent them from permeating into the stone. As mentioned above, an unsealed stone absorbs liquids fast, including water. You might have the impression that something as natural as water can’t harm your countertops, but this isn’t the case.

In an unsealed countertop, water will penetrate, leaving behind watermarks which give your stone an ugly, dirty appearance.

Damage from cleaning products

Vinegar and other harsh cleaning products will damage even the sealed surfaces, but unsealed countertops are more susceptible to damage. Since you haven’t sealed the surfaces, the products that aren’t supposed to harm the surfaces end up hurting them.

For example, products containing citrus quickly eat away at the countertop, seep into the stone and damage the finish, causing discoloration. When you seal the surfaces, you plug the cracks and tiny fissures in the stone, keeping the products from going deep into the stone. As a result you can clean the countertops without worrying about damaging them.

Sealing is straightforward

To keep your countertops in top shape, you should seal them at the time of installation then once a year thereafter. While countertop sealing is such an important task, it’s not complex.

Begin with finding a good quality countertop sealer designed to resist water and oil-based stains. Before you apply the sealer, clean the surfaces, and ensure there are no stains on them.

For best results, work in small areas, giving the sealer time to absorb into the slab before applying the second layer. After covering the entire surface, give the countertops a few hours to dry before using them.

Other ways to maintain granite

Other than sealing it, there are plenty of other things you need to do to ensure your countertop lasts for a long time. These things include:

Don’t step on the countertops

Granite is tough, but it can’t withstand a lot of pressure, especially along the edges. When you are looking to reach onto the top shelf, it’s tempting to step onto the countertops. After all, they are made from stone, right? At no time should you step on granite.

If you have to reach on to something on the top shelf, use a ladder or stool.

Don’t place hot items directly on the countertops.

Granite can withstand heat, but when you repeatedly place hot pans on it, you are bound to discolor it or even cause extensive damage. To ensure your countertops last for a long time, avoid placing hot pans, pots, and other items directly on the surfaces. Instead, use pads, trivets, and other protective materials.

Watch your cleaning products.

As mentioned above, even sealed countertops can get damaged by tough cleaning products, so stay away from them. As a rule of thumb, avoid products bearing acids as they will etch at the surfaces or even discolor your valuable surfaces.

Its recommend you use water and soap to clean the countertops. If the surfaces are too dirty and want to use other cleaning products, first enquire from the countertop company whether you can use it.

Don’t cut directly on the surfaces.

The same way certain homeowners have the impression the countertops are tough, so they can step on them, it’s the same way they think they can get away with cutting onions, meat, and other materials directly on them.

Granite companies Rockville strongly advise against this as it not only damages the countertops, but also your knife. When looking to cut anything on the surface, use a cutting board.