Expert Tips On How To Make Granite Countertops Shine

When you install granite countertops for the first time, they look elegant, and you are proud of them. With time, they wear out and get dull or even get scratched, which is depressing and discouraging. Luckily, you can revitalize the countertops by polishing them.

Why granite shines at initial installation

After it’s initially polished at the fabrication facility, granite has a beautiful natural shine. This shine is often due to the high quartz content present in the stone. The amount of shine on the stone is largely dependent on the finish of the stone. If you have a polished finish, your countertops will have an incredible shine.

Can you retain the shine?

Yes, it’s possible to retain the shine. The best way of doing it is by cleaning the countertop. Regular wiping of the surfaces with mild dish soap, warm water, and paper towel is highly effective, but for excellent results, use granite cleaner.

You shouldn’t use the common cleaning products such as Clorox, Windex, bleach, or vinegar as they will damage the stone and cause it to get dull.

How to make the countertops shine

If you have noticed your countertops beginning to dull, you should move with haste to rectify it. To do it effectively, you need to follow a series of steps that include:

Clean the countertops

Begin with removing everything from the countertops. Remove all keepsakes, appliances, and crockery and place them on the kitchen table or stovetop. After removing the large items, use a dry sponge to brush away any debris that might be present.

Scrub the surfaces

Scrubbing the surfaces is meant to remove any tough dirt that might have been left after the initial cleaning. When scrubbing the surfaces, remember that the countertops have a sealant that keeps them shiny and stain-resistant.

To protect the sealant, avoid using products that are either too acidic or basic. A little soap and water are enough to clean the granite surfaces. Add dish soap and warm water to a sponge, get a good lather then begin cleaning.

You should scrub the countertops from the back to the front in an “s” pattern. If you have stubborn or sticky spills, you may have to scrub harder.

Use a blade

If you have had the countertops for a long time and you don’t regularly clean them, it’s common to have gunk and other materials build up on the countertops. Since it’s hard to remove these with water, consider using a razor blade.

When using the blade, take care that you don’t scratch the surfaces. You do this by ensuring that the entire edge of the blade rests on the countertops. After removing all the gunk, rinse the sponge, ring it out, and wipe the remaining suds. Ensure that the countertops don’t have any large puddles or leftover suds.

Disinfect the surfaces

The purpose of doing this is to kill any germs that might be present. You don’t have to buy the disinfectant from the local store. Create your own 50/50 mixture of isopropyl alcohol and water. You should then spray the entire counter then wait for at least five minutes.

Buy granite polish

You will find granite polish in most home improvement and kitchen stores. When making the purchase, take the time to read the label to ensure that the polish is suitable for your countertops. As a rule of thumb, avoid general polishing products as they are known to damage the countertops.

Apply the polish

Spray the polish lightly over the countertops and let it sit there for 2-3 minutes. You should then buff the countertops with the polish using small, circular motions. Using a clean, soft cloth, work the polish into the granite.

Start in one corner of the countertops and work your way evenly over the countertops. Rub the polish into the countertops in small circles while paying attention to the edges. You should use a soft cloth as an abrasive material will scratch the granite.

For a streak-free finish, wipe off the polish with a damp piece of cloth. Streaks can easily ruin the appearance of the newly polished countertops, so granite installers Potomac recommend you remove any remaining polish with a soft cloth.

If you notice any excess water on the countertops after wiping them down, use another cloth to dry it off.



How To Polish Granite Countertops

Granite is one of the toughest materials in the market. Unfortunately, with time, it succumbs to scratches and etching. Dull spots also start showing giving the countertops an ugly appeal.

When this happens, you don’t have to replace the granite countertops. Work with granite experts and polish the countertops and restore the factory shine.

For you to do it effectively you should religiously follow a set of steps that include:

Clean the countertops

You can’t polish the countertops while they are still dirty, so you should start with cleaning them. Mix warm water and mild soap and use it to get rid of any spills and stains. Take caution not to use harsh chemicals on the countertops. Avoid products containing ammonia, bleach, lime, vinegar, lemon, and glass cleaners.

Get the granite polish

You can get the polish in two ways: you can make your own or buy already made polish from your local home improvement and kitchen stores. When purchasing the polish, avoid general-purpose polishing products as they have been proven to damage the countertops.

When it comes to making your polish, there are plenty of recipes you can follow. Regardless of the one you follow, ensure that the polish you make isn’t too acidic.

To make your granite polish, begin with three cups of warm water then add ¼ cup of baking soda.

Apply the solution

If your countertops are dull due to superficial scratches and light etching, you can restore the original countertop shine using granite polishing powder.

Make a paste by mixing the polishing powder with water then apply the polishing solution using a soft cloth. If using retail granite polish, spray it lightly on the countertops and let it sit for 2-3 minutes.

You should then buff the countertops with the polish using small, circular motions. Use a very soft cloth to do it as a more abrasive material will scratch the granite.

Once you are done, wipe off the polish with a damp cloth to get a streak-free finish. It’s normal to have excess water on the countertops after wiping the countertops down. If this happens, use another cloth to dry it off.

In most cases, your granite will polish nicely even when you do it by yourself, but if the countertop is profoundly scratched or damaged, the home remedies might not work. In such a case, contact a home restoration professional to professionally polish the countertops so that they look as good as new.

Professionals use wet or dry polishing techniques together with specialty tools. These tools cause irreversible damage, so you should only ensure professionals use them.

Tips on how to preserve your granite countertops

To reduce the frequency you polish the countertops, you should observe a set of tips that include:

  • Clean the spills immediately to prevent marks and stains from coming about. If you leave liquids on the surface for a long time, they cause dark, shadowy marks that give the countertops a cheap, ugly look.
  • Buff the countertops with cooking oil. This will make the countertops shiny and stain-resistant. Apply some cooking oil to the cloth and wipe it across the granite countertop surfaces. When doing it, apply gentle pressure. This will give the granite a nice shine, which also reduces the chances of stains coming about.
  • Although it’s tough and durable, granite is easily damaged when you cut directly on it. To protect it, always use a cutting board. You also shouldn’t leave any sharp objects lying around.
  • Place hot pans, pots, hair straighteners, and curling irons on an insulated mat. This is to protect the surfaces from getting burnt. It also prevents micro-scratches from coming about. According to granite installers Rockville, using an insulated mat also prevents the sealant from eroding quickly.
  • To prevent chemical damage, avoid keeping any cosmetics on the countertops. This is because most of the cosmetic products contain chemicals that can tarnish the countertops and break the sealer. Just like with hot products, place the cosmetics on a mat or tray. You can also lock them in a cabinet.
  • Keep the countertops sealed to protect the stone from everyday use. For peace of mind, do a bead test once in a while to confirm that the sealer is working optimally. Pour a few water drops on the countertops. If beads form, it shows that the seal is working properly. On the other hand, if the water drops get absorbed by the countertops, you should re-seal the countertops.