31

Mar

Expert Tips On How To Make Granite Countertops Shine

When you install granite countertops for the first time, they look elegant, and you are proud of them. With time, they wear out and get dull or even get scratched, which is depressing and discouraging. Luckily, you can revitalize the countertops by polishing them.

Why granite shines at initial installation

After it’s initially polished at the fabrication facility, granite has a beautiful natural shine. This shine is often due to the high quartz content present in the stone. The amount of shine on the stone is largely dependent on the finish of the stone. If you have a polished finish, your countertops will have an incredible shine.

Can you retain the shine?

Yes, it’s possible to retain the shine. The best way of doing it is by cleaning the countertop. Regular wiping of the surfaces with mild dish soap, warm water, and paper towel is highly effective, but for excellent results, use granite cleaner.

You shouldn’t use the common cleaning products such as Clorox, Windex, bleach, or vinegar as they will damage the stone and cause it to get dull.

How to make the countertops shine

If you have noticed your countertops beginning to dull, you should move with haste to rectify it. To do it effectively, you need to follow a series of steps that include:

Clean the countertops

Begin with removing everything from the countertops. Remove all keepsakes, appliances, and crockery and place them on the kitchen table or stovetop. After removing the large items, use a dry sponge to brush away any debris that might be present.

Scrub the surfaces

Scrubbing the surfaces is meant to remove any tough dirt that might have been left after the initial cleaning. When scrubbing the surfaces, remember that the countertops have a sealant that keeps them shiny and stain-resistant.

To protect the sealant, avoid using products that are either too acidic or basic. A little soap and water are enough to clean the granite surfaces. Add dish soap and warm water to a sponge, get a good lather then begin cleaning.

You should scrub the countertops from the back to the front in an “s” pattern. If you have stubborn or sticky spills, you may have to scrub harder.

Use a blade

If you have had the countertops for a long time and you don’t regularly clean them, it’s common to have gunk and other materials build up on the countertops. Since it’s hard to remove these with water, consider using a razor blade.

When using the blade, take care that you don’t scratch the surfaces. You do this by ensuring that the entire edge of the blade rests on the countertops. After removing all the gunk, rinse the sponge, ring it out, and wipe the remaining suds. Ensure that the countertops don’t have any large puddles or leftover suds.

Disinfect the surfaces

The purpose of doing this is to kill any germs that might be present. You don’t have to buy the disinfectant from the local store. Create your own 50/50 mixture of isopropyl alcohol and water. You should then spray the entire counter then wait for at least five minutes.

Buy granite polish

You will find granite polish in most home improvement and kitchen stores. When making the purchase, take the time to read the label to ensure that the polish is suitable for your countertops. As a rule of thumb, avoid general polishing products as they are known to damage the countertops.

Apply the polish

Spray the polish lightly over the countertops and let it sit there for 2-3 minutes. You should then buff the countertops with the polish using small, circular motions. Using a clean, soft cloth, work the polish into the granite.

Start in one corner of the countertops and work your way evenly over the countertops. Rub the polish into the countertops in small circles while paying attention to the edges. You should use a soft cloth as an abrasive material will scratch the granite.

For a streak-free finish, wipe off the polish with a damp piece of cloth. Streaks can easily ruin the appearance of the newly polished countertops, so granite installers Potomac recommend you remove any remaining polish with a soft cloth.

If you notice any excess water on the countertops after wiping them down, use another cloth to dry it off.