Water On Granite Countertops: Can You Leave Water On Granite Countertops?

If you are asking, can you leave water on granite countertops? Yes, you can, but it comes with repercussions.

If your countertops are properly sealed, you can get away with having water on the surfaces for some time, as the countertops won’t absorb water, but when you leave the water on the surfaces for a long time, there is the risk of it getting to the deeper layers of the countertops and staining them.

The situation is worse when you have hard water on your premises as the hard water leaves a white, filmy residue that is hard to remove.

What should you do about water stains?

To restore your countertops, you need to remove the water stains. How you go about it depends on the type of stains you have. To help you out, here are ways to remove these stains:

Removing light stains on a daily basis

You need to use a mild detergent and water on a sponge to remove these stains. If you have the budget, use a commercial cleaning product designed specially for granite cleaning.

When buying the commercial cleaner, ensure that it’s suitable for granite and it’s not acidic, as this can damage the sealant and stone.

Buying the best sealer is one thing and an entire animal using it. To be on the safe side and get perfect results, use the product as per the directions given by the manufacturer.

To have an easy time, clean the stains as soon as you notice them, which means less work on your part.

Light hard water stains

Have you noticed light spots around your sink or basin? These are light hard water stains, and you should move with haste and remove them. For the best outcome, remove them using a mild detergent and brush them with soft bristles. You can also use a toothbrush.

To lift the mineral deposits, put a cleanser on the stain, then gently scrub it with a brush. Once you are done, rinse it off with clean water and dry it with a towel.

You can also use a designated cleaning agent and let it sit on the stain for about 30 minutes to loosen the minerals. After this, scrub the surfaces gently with a soft brush and rinse it dry once the stain is gone.

Slightly stubborn hard water stains.

If the detergent and brush aren’t removing the water stains, use a home remedy such as baking soda. Start with creating a paste by mixing baking soda with a small amount of water until you form a paste. You should then apply the paste to the hard water stain then gently scrub it with a soft bristle brush, then once you are done, rinse the fresh water and dry with a towel.

Removing water rings around the base of your faucet

If you have got hard water running through your system, you will sometimes have water rings around the base. These rings are often hard to remove, so you need to use tough removal products, often plastic scraper or razor blade.

To remove the water ring using a plastic putty knife, ensure that the edge is flat against your granite surface. You should then remove the mineral deposits by pushing the blade against them by applying gentle pressure.

If doing it correctly, the buildup should start flaking off, and you should wipe it off with a sponge, rinse it with clean water, and dry it with a towel.

If you try using the putty knife, but it doesn’t remove the deposits, use a sharp, clean razor blade. Keep the razor blade level with the granite surface, then slowly and gently loosen the mineral deposits.

Of course, take care not to cut your fingers or the granite surface as you are doing the cleaning.

There you have it

You can leave water on your countertops, but it will come with repercussions. To prevent the stains from resulting, move with haste and remove the water as soon as you notice it.

To reduce the absorption rate of the countertops, work with your granite contractor Rockville and install a high-quality sealant on the surface of the stone.



How to Protect Granite Countertops

Every homeowner wants their countertops to last for as long as possible. And do you know what? It’s possible to do it. To help you out, here are tips on how to protect granite countertops:

Seal the countertops

This is a no brainer. In fact, this is the first thing people think about when they think about protecting their granite. Since granite is porous, it’s paramount that you protect it from stains by sealing it.

To do it, seal the surfaces immediately after installation, then at least once a year thereafter. For best results, use a high-quality sealant. An expert should do the sealing work.

Clean the surfaces regularly

You might have the impression that cleaning the countertops is an aesthetic issue, but this isn’t the case. Cleaning the countertops is a protective measure. When you regularly clean your countertops, you remove dirt and other materials that can scratch the surfaces.

The good thing is, you don’t have to be fancy about granite cleaning. Wiping the surfaces with a damp, soft cloth and some soap is enough. Wait for the surfaces to dry, then buff them as much as you can.

Cleaning the countertops is essential, but you will be doing more harm than good when you use the wrong cleaning products. To keep your countertops in top shape, use non-abrasive cleaners. To be even in a better place, use cleaners specially designed for granite surfaces.

As you prepare the meals or have a good time with your friends, it’s common for spills to happen. For example, juice or even water can spill on the countertops. When an accident happens, move with haste and get rid of the spills as soon as possible.

Although your countertops are sealed, letting large amounts of liquids stay on the surfaces for long is inviting disaster as the liquids can seep into the stone’s deeper layers and become hard to remove.

Protect your surfaces from extreme heat

It’s no doubt that granite is tough and can withstand a lot of heat, but it’s not heatproof. This means you will damage the countertops when you repeatedly expose them to a lot of heat.

Thankfully, you can prevent this from happening by placing your hot pots on hot pads, trivets and other protective items.

Even when taking hot coffee, don’t assume your countertops are tough and will take the heat. Have a coaster under the cups at all times.

Don’t sit on the countertops.

When you look at the countertops, they appear solid and extremely strong that many homeowners are tempted to sit or even stand on them. Don’t do this.

Despite the tough appearance, granite is brittle, especially on the edges, so when you exert a lot of pressure there, you risk breaking it.

To avoid this, don’t sit on the countertops when you are in the kitchen. You also shouldn’t step on the surfaces to reach the top shelves or replace the bulb. Instead, use a ladder.

If you often have people with you in the kitchen, have a few seats in place, so they aren’t inclined to sit on the countertops.

Ensure the countertops are installed by an experienced professional

You may be wondering what granite installation got to do with its protection, but the two go hand in hand. When your countertops are poorly installed, they are more likely to break or even fall from the cabinets and get damaged.

To avoid this, ensure your countertops are installed by experienced and certified granite installers Rockville.

The beauty of it is that it’s easy to find these contractors—you only need to be patient and strategic when doing it. The first place to ask is your friends and relatives. If none has recently worked with a contractor, try it online.

Do a Google search and interview the potential technicians that you find. Many people hire the first contractor that shows up first in the search results. Don’t do this as ranking first on Google isn’t proof they will provide a good service.

The key to finding the ideal contractor is to not be in a hurry. Have several interviews with the technicians and settle with the most experienced.

It also doesn’t hurt working with a contractor with a great personality.



5 Ways To Keep Granite Countertops Looking New

When you install granite countertops, you want them to keep the fresh look for as long as possible, and you have every right to as you have spent a lot of money installing them. The good news is that it’s possible to do it. To help you out, here are tips on how to keep granite looking new:

Watch out for the heat.

As a natural stone, granite looks tough and indestructible. While it’s one of the most durable countertop materials on the market, it’s not indestructible. The countertop is also heat resistant, but unfortunately, it’s not heatproof.

This means when you expose it to high temperatures, such as placing hot pans directly on it, it will get damaged. While the hot pan might not leave an ugly burn mark on the countertop, it can cause scratching, forcing you to replace the countertop.

To keep your countertops looking new, protect the surfaces from the hot pots and pans. Thankfully, it’s easy to do it.

When cooking, always have hot pads and trivets in place. Place the hot pans and pots here instead of placing them directly on the countertop surface.

Don’t sit on the countertops.

Granite is strong and durable, but the edges are prone to damage when you place a lot of weight and pressure on it. Due to this, sitting on the countertop edges is harmful as you risk cracking the surfaces, and you are left with an ugly piece that you have to replace to restore the look of your countertops.

To ensure this doesn’t happen, don’t stand on the countertops. Also, don’t sit on the counters as you are cooking or spending time with your better half.

For the kids, let them know they can’t sit or play on the counters.

Have a cutting board in place all the time

Most people make the mistake of treating their countertops as their cutting boards. This is understandable as the countertops appear tough, so many people have the impression they can’t get damaged. How wrong are they?

While you can get away with chopping a few onions for a party dip, making it a habit is counterproductive.

For one, the countertops have plenty of bacteria, so when you chop your meat and other foods on the countertops, you expose them to the many bacteria on the counters. The meat can also get into the stone’s natural pores, making it hard to disinfect them once you are done.

Most foods contain acids that can etch or even stain the countertops. This means you shouldn’t cut grapefruits, lemons, or limes directly on the countertops as they will cause damage.

The tough nature of the countertops can damage the knives and dull them. To protect your precious knives and keep off the food from your countertops, always have a cutting board in place.

Clean your countertops

This is the first thing that comes to most homeowners’ minds when they think about maintaining their countertops looking new. While it’s true cleaning the countertops comes in handy at maintaining them looking new, you have to do it right.

Clean your countertops daily to keep stains, bacteria, and spills from penetrating the countertop seal and seeping into the natural pores of the stone.

You don’t have to be fancy when cleaning the counters. Using water and a few drops of dish soap is enough. An easy way to do it is to mix the two, put them in a spray bottle, and then spray directly on the countertops. Follow up by wiping the surfaces with a clean cloth, rinse with clean water then dry with another clean cloth.

Regular cleaning of the countertops prevents them from getting foggy and grimy with stains.

Avoid harsh cleaning products such as steel wool as they will scratch the surfaces, leaving you with ugly countertop surfaces.

You only need to maintain your granite.

The key to keeping your granite looking new is to take good care of it. Besides the above tips, also reseal the countertops at least once a year. You can do the sealing or hire granite contractors Rockville to help you out.



9 Things You Shouldn’t Place On Your Granite Countertops

While granite countertops are tough, certain things can destroy them hence you shouldn’t place them on the countertop surfaces. These things include:

Raw meat

No. Raw meat won’t damage your countertops. When you place the meat on the countertops, salmonella and other bacteria are left on the surface, and they can spread to the other food you place on the countertops.

If you have ever placed meat on the countertops, you always have the urge to cleanse the surfaces with harsh disinfectants, right? This happens with most homeowners.

The disinfectants and cleansers dull and damage the countertop sealant. In some cases, the products are too tough that they discolor the granite.

For you to keep your countertops in top shape for a long time, never place raw meat on the surfaces. When cutting the meat, put it on a cutting board.


Due to their look, the countertops might seem like the perfect areas to chop your food. Unfortunately, the surfaces are prone to chips, cuts, and scratches that can dull them.

When you cut on the surfaces, you can also dull the knives, which increases your risk of lacerations.

For you to protect your countertops and knives, avoid chopping directly on the granite surfaces. Just like with meat, have a cutting board in place. When placing the blades on the countertops, keep them inside a protective knife block.


It’s hard to avoid water spills on the kitchen countertops, but you can stay away from juice and wine spills. You can do this by avoiding placing the products on the countertops. When the spills happen by mistake, clean the countertops immediately.

The reason for this is because the spills leave a dark shadowy spot that gives the surfaces a cheap, ugly look. Of significant importance, avoid wine and cranberry juice spills as they leave light-colored stains that are hard to remove.


Soft drinks, citrus fruits, vinegar, lotions, perfumes, nail polishes, and soaps are acidic, and can etch the surfaces and damage the granite seal, making the countertops stain more easily.

In the kitchen, keep the acidic products in a drawer where they can’t get into contact with the countertops. When cooking, be cautious that you don’t spill them.

In the bathroom, put the personal care products in a cabinet or basket with a secure base that won’t leak in the event of a spill.

Impact damage

It’s true granite is extremely hard, but the impact of a heavy object can cause it to chip. Chipping is common around the sink and edges. The visibility of the chips depends on the color of the countertops.

For you to prevent the damage from coming about, be cautious when lifting heavy objects above the countertops.


When cooking, it’s common for oil used in cooking to leak down the bottle. The oil can stain the countertops leaving ugly stains. For you to prevent stains resulting from the oil, keep the oil bottles and oily sauces in the cupboard.

Hot pans

Granite is an igneous rock that can handle a lot of heat; thus, a brief encounter with a hot pot won’t hurt the countertops. While this is the case, exposing the countertops to excessive heat weakens the sealants, which not only means that the liquids directly flow into the countertops, it also gives the countertops an ugly look.

For you to prevent the countertops from getting damaged, always have trivets and potholders nearby when cooking. When spills happen when cooking, wipe them immediately.

A lot of weight

The countertops are tough and can take a lot of weight, but this is no reason to stand or sit on them. When you place a lot of weight on the edges, the countertops can easily crack, forcing you to replace them, which is expensive.

Keep heavy loads off the countertops. If you can’t, place the load at the center (not at the edges where it can easily crack the surfaces).


If you are like other homeowners, you use soap to clean your countertops. While there is nothing wrong with this, regular use of soap leads to soap accumulation. According to granite installers Rockville, excessive soap gives the countertops a murky look.

To keep the countertops in top shape, use the soap in moderation. After using it, clean all of it off.