31

Mar

Water On Granite Countertops: Can You Leave Water On Granite Countertops?

If you are asking, can you leave water on granite countertops? Yes, you can, but it comes with repercussions.

If your countertops are properly sealed, you can get away with having water on the surfaces for some time, as the countertops won’t absorb water, but when you leave the water on the surfaces for a long time, there is the risk of it getting to the deeper layers of the countertops and staining them.

The situation is worse when you have hard water on your premises as the hard water leaves a white, filmy residue that is hard to remove.

What should you do about water stains?

To restore your countertops, you need to remove the water stains. How you go about it depends on the type of stains you have. To help you out, here are ways to remove these stains:

Removing light stains on a daily basis

You need to use a mild detergent and water on a sponge to remove these stains. If you have the budget, use a commercial cleaning product designed specially for granite cleaning.

When buying the commercial cleaner, ensure that it’s suitable for granite and it’s not acidic, as this can damage the sealant and stone.

Buying the best sealer is one thing and an entire animal using it. To be on the safe side and get perfect results, use the product as per the directions given by the manufacturer.

To have an easy time, clean the stains as soon as you notice them, which means less work on your part.

Light hard water stains

Have you noticed light spots around your sink or basin? These are light hard water stains, and you should move with haste and remove them. For the best outcome, remove them using a mild detergent and brush them with soft bristles. You can also use a toothbrush.

To lift the mineral deposits, put a cleanser on the stain, then gently scrub it with a brush. Once you are done, rinse it off with clean water and dry it with a towel.

You can also use a designated cleaning agent and let it sit on the stain for about 30 minutes to loosen the minerals. After this, scrub the surfaces gently with a soft brush and rinse it dry once the stain is gone.

Slightly stubborn hard water stains.

If the detergent and brush aren’t removing the water stains, use a home remedy such as baking soda. Start with creating a paste by mixing baking soda with a small amount of water until you form a paste. You should then apply the paste to the hard water stain then gently scrub it with a soft bristle brush, then once you are done, rinse the fresh water and dry with a towel.

Removing water rings around the base of your faucet

If you have got hard water running through your system, you will sometimes have water rings around the base. These rings are often hard to remove, so you need to use tough removal products, often plastic scraper or razor blade.

To remove the water ring using a plastic putty knife, ensure that the edge is flat against your granite surface. You should then remove the mineral deposits by pushing the blade against them by applying gentle pressure.

If doing it correctly, the buildup should start flaking off, and you should wipe it off with a sponge, rinse it with clean water, and dry it with a towel.

If you try using the putty knife, but it doesn’t remove the deposits, use a sharp, clean razor blade. Keep the razor blade level with the granite surface, then slowly and gently loosen the mineral deposits.

Of course, take care not to cut your fingers or the granite surface as you are doing the cleaning.

There you have it

You can leave water on your countertops, but it will come with repercussions. To prevent the stains from resulting, move with haste and remove the water as soon as you notice it.

To reduce the absorption rate of the countertops, work with your granite contractor Rockville and install a high-quality sealant on the surface of the stone.

30

Mar

How Do You Ruin Granite Countertops?

While granite is one of the toughest countertop materials on the market, it can still get ruined. How do you ruin granite countertops? There are plenty of ways you can do it. These ways include:

Ignoring spillages

Due to the tough granite look, some homeowners ignore it when spills happen on granite surfaces. This is wrong. While granite is tough, it’s highly porous, so when you let even water sit on the surfaces for a long time, it risks sinking to the deeper layers and causing stains.

To prevent this from happening, you should make it a habit to clean the spills as soon as they happen.

If you were away when the spills happened, and now the countertops are already stained, all is not lost as there are several tricks you can use to remove the stain.

One of the most effective ways to remove the stain is to use a homemade paste out of acetone and baking soda. Let the mixture sit overnight, then wipe it clean and rinse it with water.

To completely remove the stain, you may have to repeat this process 2-3 times, so it’s always wise to reseal the countertop surfaces after the process, as acetone has been shown to strip away the existing sealer.

If you repeat this process and still the stain doesn’t go away, get in touch with a professional to help you remove it.

Placing hot pots directly on the countertops.

Granite is one of the hardest stones on earth, so the hot pots and pans can’t damage it, right? Well, this is wrong.

While the countertop is heat resistant, it’s not heatproof. This means that when you regularly expose it to a lot of heat, it’s bound to get damaged, and you don’t want this, do you?

To protect your countertops, always have trivets and heat pads in place. These will absorb the heat and keep your surfaces safe from heat damage.

Cutting directly on granite

The same way granite is tough and can withstand heat damage for some time is the same way it can withstand knife abuse, but for just some time.

When you regularly chop meat, vegetables, or anything else on the countertops, you create significant scratches on the countertops, which dulls the appearance of the stone. There is also the risk of damaging the knives.

To ensure this doesn’t happen, always have a chopping board in the kitchen and use it whenever you want to cut anything.

Standing on the countertops.

As we have been saying, granite has a tough look, and this encourages homeowners to sit or even stand on the countertops. While you might get away with it at first, there is the risk of cracks on the countertops enlarging and breaking the countertop surfaces when you repeatedly do it.

Sometimes the countertops will crack and break especially when you sit or stand on the edges.

Avoid sitting or standing on the countertops to be on the safe side. If you want to spend time in the kitchen as you are preparing the meals, don’t sit on the countertops. Use a chair.

Instead of standing on the countertops as you reach the top shelf or replace the bulb, stand on a ladder or stool.

The same way you shouldn’t sit or stand on the countertops is the same way you shouldn’t let the children sit or stand there as the present striations will crack under excessive weight.

Using the wrong cleaning products

Every homeowner wants to give their countertops the best look possible, so they are sometimes tempted to clean the surfaces with tough cleaning products.

As much as cleaning products containing ammonia and bleach thoroughly clean the surfaces, they sometimes lead to the granite stone losing its luster, and you are forced to spend a good amount of money polishing the surfaces.

To prevent this, avoid tough cleaning products. Instead, use soap and hot water. To prevent the surfaces from being too dirty, clean them often.

Granite contractors Rockville recommend that you clean the surfaces at the end of each day. This way, the surfaces don’t accumulate too much dirt that you are tempted to use tough cleaning products.